Artltdmag is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to Revive Micron Pens Using Heat, Water and Alcohol

Written by Robert S. Brown / Fact checked by Helen B. Harris

how to revive micron pens

Artists, illustrators, and writers belove micron pens for their precision and ability to create fine lines. However, like all pens, Micron pens can dry out over time, leaving you with seemingly unusable markers. Before you toss them in the trash, consider that there are ways to revive your Micron pens and bring them back to life.

So, how to revive micron pens? To fix a clogged micron pen, you can dip the pen’s nip into warm water or use alcohol.

Keep reading to learn the detailed steps and tips for each method to ensure your Micron pens continue serving you faithfully.

Ways to Revive Micron Pens

Micron pens are known for their archival-quality ink, which is pigment-based and waterproof. This ink is designed to resist fading and maintain its vibrancy over time. However, these pens are also susceptible to drying out if not properly cared for or used frequently.

To bring a pen back to life, follow these methods below!

1. Hot Water

Hot-Water

One of the simplest ways to fix a clogged micron pen is to use hot water. Hot water can help dissolve the dried ink on the nib and restore the ink flow.

Here are the steps to use water to revive your Sakura pigma micron pen:

  • Fill a small cup or container with hot water.
  • Dip the tip of the micron pen into the water for a few seconds. Do not submerge the entire pen or the ink may leak out.
  • Wipe the tip with a paper towel or a cloth to remove excess water and in then test the pen on scrap paper. If the ink is still not flowing well, repeat the process until it does.

2. Distilled Water

Distilled-Water

Reviving a micron dried ink pen with distilled water is a gentle method that helps rehydrate dried ink, making the pen usable again. It’s especially effective if the ink has dried out due to prolonged exposure to air.

  • Pour a small amount of distilled water into the clean cup.
  • Gently remove the cap from the Micron pen and place the nib (the tip) into the cup with distilled water. Ensure that the nib is completely submerged.
  • Allow the pen nib to soak in the distilled water for about a minute. This will help rehydrate the dried-out ink inside the pen.
  • After the soaking period, carefully remove the pen nib from the water and place it on a paper towel or tissue. Make sure to dry the nib thoroughly.

3. Alcohol

Alcohol

Another way to unclog micron nib is to use alcohol. Here how!

  • Fill a small cup with isopropyl alcohol to submerge the nib completely. If you’ve disassembled the pen, you can also soak the nib and other components.
  • Place the nib (or the entire pen, if disassembled) in the alcohol for a few minutes to dissolve dried ink and debris clogging the pen’s tip.
  • After soaking, remove the pen from the alcohol and shake it gently to remove excess liquid. Place it on a clean paper towel for a few minutes. Then, test the pen on scrap paper to check if the ink flows smoothly.
  • If the pen still doesn’t work correctly, you can repeat the process. Sometimes, stubborn clogs may require a couple of attempts to completely clear.

Besides all the above techniques, sometimes, you just need to scribble your Micron pen on a scrap piece of paper. It also may help get the ink flowing again.

Note: Proper Storage

Properly storing your micron archival ink pens is essential to ensure their longevity and reliable performance.

If you find your micron pen not working, it can be running out of ink. Additionally, ink can dry out if the pen is left unused for an extended period, causing it to become clogged and rendering it temporarily unusable.

In some instances, if you find your micron pen leaking, it may be due to nib damage. To prevent these issues, it’s crucial to cap your Micron pens securely when not in use, store them horizontally, and avoid exposing them to extreme temperature fluctuations.

Conclusion

Knowing how to revive Micron pens is essential for artists, writers, and anyone who relies on their fine and precise lines.

There are some simple ways to revive a dead pen including using hot water, distilled water, or alcohol. By employing these methods, you can prolong the life of your Micron pens and ensure they consistently deliver exceptional performance.

But it’s also crucial to know that these solutions do not always work effectively.

5/5 - (2 votes)